10x38陶瓷高压保险丝 10C-500V/600V/1KV/3KV 1.规格型号和安规认证 MODEL NUMBER AND SAFETY CERTIFICATION 品名规格:系列号+额定电流+额定电压+认证符号 Model Number: Part Number+Rated Current+Rated Voltage+Approvals. 例子[example]: 10HCU 40A 500V 1)系列号 Part Number 2)额定电流 Rated Current 1) 2) 3) 3)额定电压 Rated Voltage 1-2 额定电流和额定电压 Rated Current And Voltage 额定电流: 100mA~50A Rated Current: 100mA~50A 额定电压;125V/250V~1000V AC Rated Voltage:125V/250V~1000V AC 1-3标示Marking 保险丝上需有下列标示 The fuse shall have the following marking: 规格:特性符号+额定电流+额定电压 Specification:Characteristic Symbol+Rated Voltage 100mA~800mA : _mA500V 1A~50A:_A500V Trade mark:The Manufacture’s Logo+Part Number+Approvals 100mA~500A: 注意:对标示字样大小没有规定 Note:Size of the markings have not be specified. 2.适用范围 SCOPE 适用於一般电子设备。Used in electronic equipment. 3.工程图和结构 OUTLINE DRAWING AND STRUCTURE 3-1 工程图(单位:mm) Outline Drawing and Dimensions(Unit:mm) 3-2结构 Structure 编号 No. 元件 Component 材质 Material 数量 Quantity (1) 熔丝 Wire 合金 Alloy 1 (2) 铜帽 Cap 黄铜镀镍 Brass with mickel plated 2 (3) 本体 Body 陶瓷管 CERAMIC Tube 1 4.外观及形状 APPEARANCES AND CONFIGURATION 4-1外观:不应有破碎、明显的污斑 Appearances:There shall no fragmentation and of remarkable blotch. 4-2形状:带脚的保险丝 Configuration:Axial Leaded Fuse. 5.物理特性 PHYSICAL CHARACTERISTIC 5-1 拉力测试 Tensile test 沿端子的轴向施加10N的拉力,持续1分钟。 Keep pulling the cap of the fuse with 10N at axial direction for 1 min. 6.电气特性 ELECTRICAL CHARACTERISTICS 熔断/电流特性: Pre-Arcing Time/Current Characteristic a、Electrical characteristics Fast Acting(参照美标) Rated current 135% 200% 100mA~50A Max. Max. 1 hour 120 sec b、Temperature character When ** of rating the temperature rise doesn’t exceed 75℃. 7.环境特性 ENVIRONMENTAL SPECIFICATION 7-1 操作温度范围:-5℃~60℃ Operating Temperature: -5℃~60℃ 7-2 保存条件 Storage Conditions 温度:+10℃~60℃ Temperature: +10℃~60℃ 在相对湿度≤75%下平均可存放3年 On average, It can be stored below the relative humidity or 75% for 3 years. 在非露天下,相对湿度为95%下较多可存放30天。 Without dew, It can be kept under humidity of 95% for 30 days. 8.其他使用注意事项 OTHER NOTICE IN USING 如果需在保险丝上加热缩套管,烘烤温度与时间需参照以下规定 If heat shrink tubing was needed,the roast temperature and time should be refer to the following. 设定烘烤温度:不大於150℃ 烘烤时间:50s Max. The temperature should be sel under 150℃,roast time:50s Max.