5x20mm 陶瓷管慢断保险丝 --------UL CSA CCC 1.规格型号和安规认证 MODEL NUMBER AND SAFETY CERTIFICATION 品名规格:系列号+额定电流+额定电压+认证符号 Model Number: Part Number+Rated Current+Rated Voltage+Approvals. 例子[example]: 5CTU 2A 125V/250V 1)系列号 Part Number 2)额定电流 Rated Current 1) 2) 3) 3)额定电压 Rated Voltage 1-2 额定电流和额定电压 Rated Current And Voltage 额定电流: 32mA~20A Rated Current: 32mA~20A 额定电压:125V/250V AC Rated Voltage:125V/250V AC 1-3标示Marking 保险丝上需有下列标示 The fuse shall have the following marking: 规格:特性符号+额定电流+额定电压 Specification:Characteristic Symbol+Rated Voltage 32mA~800mA : _mA125V/250V 1A~20A:_125V/A250V Trade mark:The Manufacture’s Logo+Part Number+Approvals 32mA~20A: 注意:对标示字样大小没有规定 Note:Size of the markings have not be specified. 2.适用范围 SCOPE 适用於一般电子设备。Used in electronic equipment. 3.工程图和结构 OUTLINE DRAWING AND STRUCTURE 3-1 工程图(单位:mm) Outline Drawing and Dimensions(Unit:mm) 3-2结构 Structure 编号 No. 元件 Component 材质 Material 数量 Quantity (1) 熔丝 Wire 合金 Alloy 1 (2) 铜帽 Cap 黄铜镀镍 Brass with mickel plated 2 (3) 本体 Body 陶瓷管 ceramic Tube 1 (4) 引线 Lead 镀锡铜线 Tinned Copper wire 2 (5) 砂 Sand 石英砂 Quartz sand 1 4.外观及形状 APPEARANCES AND CONFIGURATION 4-1外观:不应有破碎、明显的污斑 Appearances:There shall no fragmentation and of remarkable blotch. 4-2形状:带脚的保险丝 Configuration:Axial Leaded Fuse. 5.物理特性 PHYSICAL CHARACTERISTIC 5-1 拉力测试 Tensile test 沿端子的轴向施加10N的拉力,持续1分钟。 Keep pulling the cap of the fuse with 10N at axial direction for 1 min. 6.电气特性 ELECTRICAL CHARACTERISTICS 熔断/电流特性: Pre-Arcing Time/Current Characteristic a、Breaking capacity(分断能力)(Time Lag and Fast Acting) 1500A/1000A 125V/250V AC b、Electrical characteristics 美标(UL) RATED CURRENT 1IN 1.35IN 2IN MIN MIN MAX MIN MAX 32mA~20A 4H 15S 1H 0.5S 5SEC c、Temperature character When ** of rating the temperature rise doesn’t exceed 75℃. d、Code&Approvals Amp Code Amp Rating (A) Voltage Rating (V) Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) Maximum Voltage Drop (mV) Agency Approvals UL CSA CE 5CTU-.032 0.032 125/250 48.2580 0.01100 5000 x 5CTU-.040 0.04 125/250 31.8620 0.01100 4000 x 5CTU-.050 0.05 125/250 21.2920 0.01700 3500 x 5CTU-.063 0.063 125/250 14.2680 0.02800 3000 x 5CTU-.080 0.08 125/250 9.0700 0.07500 2500 x 5CTU-.100 0.1 125/250 6.0180 0.07900 2000 x 5CTU-.125 0.125 125/250 4.2000 0.1465 1900 x 5CTU-.160 0.16 125/250 3.7000 0.14400 1500 x x x 5CTU-.200 0.2 125/250 1.6000 0.3410 1300 x x x 5CTU-.250 0.25 125/250 1.0495 0.5405 1100 x x x 5CTU-.315 0.315 125/250 0.8475 1.1100 1000 x x x 5CTU-.400 0.4 125/250 0.5350 1.3250 900 x x x 5CTU-.500 0.5 125/250 0.3700 2.8250 300 x x x 5CTU-.600 0.60 125/250 0.2750 4.6750 250 x x x 5CTU-.800 0.8 125/250 0.0813 3.370 150 x x x 5CTU-001. 1 125/250 0.0613 6.730 150 x x x 5CTU-01.5 1.5 125/250 0.0336 23.350 150 x x x 5CTU-002. 2 125/250 0.0293 14.450 150 x x x 5CTU-02.5 2.5 125/250 0.0219 23.250 120 x x x 5CTU-003 3 125/250 0.0173 38.150 100 x x x 5CTU-004. 4 125/250 0.0129 69.10 100 x x x 5CTU-005. 5 125/250 0.0104 111.00 100 x x x 5CTU-006 6 125/250 0.0076 198.50 100 x x x 5CTU-007 7 125/250 0.0065 260.30 100 x x x 5CTU-008. 8 125/250 0.0059 341.50 100 x x x 5CTU-010. 10 125/250 0.0045 568.00 100 x x x 5CTU-12.5 12.5 125/250 0.0034 889.00 100 x x x 5CTU-015. 15 125/250 0.0028 1405.00 100 x x x 5CTU-016. 16 125/250 0.0021 1955.00 100 x x x 5CTU-20 20 125/250 0.0016 2085.00 100 x x x Temperature Rerating Curve Average Time Current Curves 7.环境特性 ENVIRONMENTAL SPECIFICATION 7-1 操作温度范围:-5℃~60℃ Operating Temperature: -5℃~60℃ 7-2 保存条件 Storage Conditions 温度:+10℃~60℃ Temperature: +10℃~60℃ 在相对湿度≤75%下平均可存放3年 On average, It can be stored below the relative humidity or 75% for 3 years. 在非露天下,相对湿度为95%下较多可存放30天。 Without dew, It can be kept under humidity of 95% for 30 days. 8.焊接条件 SOLDERING PAAMETERS 8-1波峰焊 Wave Solder 焊接温度:260±5℃ Soldering Temperature:260±5℃ 焊接时间:4 Sec. Max. Soldering Time:4 Sec.Max. 8-2手工焊锡 Manual Solder 焊接温度:350±5℃ Soldering Temperature: 350±5℃ 焊接时间:3 Sec. Max. Soldering Time: 3 Sec. Max. 9.其他使用注意事项 OTHER NOTICE IN USING 如果需在保险丝上加热缩套管,烘烤温度与时间需参照以下规定 If heat shrink tubing was needed,the roast temperature and time should be refer to the following. 设定烘烤温度:不大於150℃ 烘烤时间:50s Max. The temperature should be sel under 150℃,roast time:50s Max.